Disk type tailings reclaim machines are composed of five parts: main machines, unloading devices, set mine launders, launders and body frames. Their working principle is as follows: the main machine’s disk is installed in the launder. When the mine slurry flows from one end of the launder, and flows through the gap between disks, magnetic minerals in the slurry are adsorbed on the surface of the disk, and the remaining non-magnetic slurry flows out from the other end. When the main machine’s disk rotates, the magnetic minerals adsorbed on the disk surface are taken out from the launder. When entering the unloading area, the magnetic minerals are brought to set mine launder by the mine unloading device inserted between the disk slots and are collected and output by the set mine launder.
1.Magnetic field: Space between the disk and magnetic pole is small and there is no-zero magnetic field between the disks.
2.Unloading: Unloading is the non-contact forced discharge. The surface of the disk has a layer of protective powder layer and no friction. The service life of medium and small machines is 8-10 times of the conventional models’, and also increases the grade of magnetic minerals reclaims.
3.Large processing capacity: This machine is specially designed for tailings reclaim. It has characteristics of processing large flow and low grade tailings. Its processing capacity is several even tens of times of the existing cylinder type magnetic separator.
4.High reclaiming rate: All the material through the space of the disks is subjected to a magnetic field and magnetic minerals are fully retrieved with high recovery rate.
5.Saving water: Because of the special design of the magnetic field, magnetic minerals have amount of water. The unloaded minerals are flowage, so no water or only little water is needed.
6.Saving electricity: The processing capacity of a disk tailings reclaim machine is several and even tens of times of a common machine. The installed capacity is only a few thousand watts, so the effect of power saving is obvious.
7.Convenient installment: The disk tailings reclaim machine has large processing capacity, small footprint. It can be installed where there is tailing chute place.
8.High economic benefit: Equipment investment is small but output benefit is high. Annual output efficiency generally is several or even tens of times of the equipment investment.
1 To configure a consistent type machine according to the customer's actual demand
2 To customize products according to the customer's special demand
3 Our company can send technical personnel to the user site to design site and the best procedure and planning.
1 Strict inspection on the products before they go out
2 To deliver the products in accordance with the contract
1 Free training technical personnel for clients
2 According to the purchase contract, our company can send technical personnel to guide installation and adjustment for free.
3 The company supplies machine parts all year round.
4 The company collects customer’s feedback, timely formulates implementation plans to solve customer’s problems.
5 In case of unexpected problems, they can be solved within 24 hours from the company within 1000 kilometers. For those more than 1000 kilometers, we give satisfied reply within 24 hours.
The screening equipments manufactured by our company include electromagnetic high frequency vibrating sieves, linear vibrating sieves and tailings reclaim machines. They are all high-performance equipments and have been proven as successful in many plants by bringing them high yields.